What is a Line Array?

A line array is a PA system made of several speaker cabinets hung in a curved column, usually flown above each side of the stage, to send even sound across large audiences. Most arena, festival and large venue PAs are line arrays.

How a line array works

A line array is designed and installed in stages:

  1. Prediction: the system engineer models the venue in software to choose the number of cabinets and the angles between them.
  2. Rigging: the cabinets are linked together and lifted on motors from rigging points above each side of the stage.
  3. Angles: the top cabinets aim at the back of the audience and the lower ones curve down towards the front.
  4. Coupling: because the cabinets sit close together, their sound combines into one controlled wave that travels further with less spill.
  5. Tuning: the system engineer measures and adjusts the system with EQ and delay before sound check.

Visiting acts check the venue's PA in its technical specification during the advance. Venues often share this specification through documents in Crescat.

Line array vs point source

A point source speaker sends sound out in a wide cone from one box, which suits smaller rooms. A line array controls sound vertically, so it reaches the back of a large space without being too loud at the front, and spills less onto the stage and ceiling.

Parts of a line array system

  • Main hangs: the left and right arrays, the mains
  • Subwoofers: for low bass, often on the ground or flown
  • Out fills: cover the sides of the audience
  • Front fills: small speakers on the stage edge for the front rows
  • Delay towers: extra arrays further back at large outdoor events

Frequently asked questions

Why are line arrays flown above the stage?

Flying them gives a clear path to the whole audience, so people at the front aren't blasted while the back still hears well. It also keeps sightlines to the stage clear.

How many cabinets does a line array need?

It depends on the room size and throw. A mid-sized venue may use six to eight cabinets per side, while stadiums can use twelve to sixteen per side plus side and delay arrays.

What are delay towers?

Delay towers are extra speakers placed partway back in a large outdoor audience. Their sound is delayed electronically so it arrives in time with the sound from the stage.

Related terms