What is a Line Check?
A line check is a quick test of every audio input, from each microphone and instrument on stage through to the mixing desk, to confirm signals are working before a performance. It checks that everything is connected, not how good the mix sounds.
How a line check works
A line check usually runs channel by channel:
- Patch: the stage crew plug everything in following the patch list.
- Test each input: a technician speaks into each mic, taps each drum or plays a few notes on each instrument.
- Confirm at the desk: the sound engineer checks each channel arrives on the right input at a sensible level.
- Check monitors: the monitor engineer confirms each wedge or in-ear mix is working.
- Fix: faulty cables, mics or DI boxes are swapped before the act goes on.
At festivals the line check happens during the changeover, so timings are tight. Stages keep to time by working from a running order in Crescat.
Line check vs sound check
A line check only confirms each input works, usually without the band playing together. A sound check is a full rehearsal where the band plays and the engineers set the mix and monitors. Festival acts often get only a line check. Headliners sometimes get a full sound check earlier in the day.
Typical line check order
- Kick, snare, hi-hat, toms and overheads
- Bass DI and bass amp mic
- Guitar amps
- Keyboards and playback
- Vocal mics, lead last
- Monitor mixes, one at a time
Frequently asked questions
How long does a line check take?
For a typical band, five to fifteen minutes. A large act with many inputs or a complicated playback rig can take longer.
Who does the line check?
Usually a stage technician or the band's own crew makes each sound, while the front of house and monitor engineers listen at their desks. Members of smaller bands often line check their own instruments.
Why do festivals use line checks instead of sound checks?
There isn't time for every act to sound check on a shared stage. Engineers often prepare the mix in advance from files or notes, and the line check confirms everything is plugged in correctly.
Related terms
- Sound Check: the full pre-show rehearsal
- Patch List: what is being checked
- Changeover: when festival line checks happen
- Mic Check: testing a single microphone
- DI Box: inputs that are line checked